Cnc Machining Custom Parts

oem cnc machining custom parts high quality titanium cnc milling 

How long does it take to machine a cnc machining custom parts?
The time for CNC processing manufacturers to produce parts is actually not fixed. The processing cycle is determined by many factors. There are many CNC processing manufacturers, and the processing cycle of the same product is also different. If the CNC processing factory has less equipment, the workshop does not have a corresponding management mechanism, the staff will work in a lazy state, the work efficiency will decrease, and the processing cycle will naturally increase. However, some CNC processing manufacturers have dozens of processing equipment and corresponding management mechanisms (for example: ISO quality management mechanism), work in an orderly manner, the efficiency will inevitably increase, and the delivery time will naturally be much faster.

XIAMEN HAOZE TECHNOLOGY CO.,LTD. specializes in processing various precision parts, has 12 years of processing experience, has more than 60 processing equipment, nearly 80 staff, two-shift mechanism, 24-hour non-stop, precision parts processing is over to specialists New precision guarantees that you will receive the product within the agreed time.

cnc precision mechanical parts
We will deal with the problems encountered in cnc precision mechanical parts in this way
1. Workpiece overcut:
reason:
1. The knife is fired, the knife is not strong enough, too long or too small. Causes the knife to bounce.
2. Improper operation by the operator.
3. The cutting allowance is uneven. (For example: leave 0.5 for the side of the curved surface and 0.15 for the bottom)
4. Improper cutting parameters (such as: too large tolerance, too fast SF setting, etc.).
improve:
1. The principle of using a knife: it can be big or small, short or long.
2. Add the corner cleaning program, and keep the margin as even as possible (leave the same margin on the side and bottom).
3. Reasonably adjust the cutting parameters, and round the corners with large margins.
4. Using the SF function of the machine tool, the operator can fine-tune the speed to achieve the best cutting effect of the machine tool.

Two points:
reason:
1. The operator is not accurate in manual operation, and the manual operation is wrong.
2. There are burrs around the mold.
3. The center rod is magnetic.
4. The four sides of the mold are not vertical.
improve:
1. Manual operation should be carefully checked repeatedly, and the points should be at the same point and height as much as possible.
2. Use oil stone or file to deburr around the mold, wipe it with a rag, and finally confirm it by hand.
3. Demagnetize the centering rod before centering the mold (ceramic centering rod or others can be used).
4. Calibrate the meter to check whether the four sides of the mold are vertical, (if the verticality error is large, you need to review the plan with the fitter).

Three. Knife setting:
reason:
1. The operator is not accurate in manual operation, and the manual operation is wrong.
2. The tool clamping is wrong.
3. The blade on the flying knife is wrong (the flying knife itself has a certain error).
4. There is an error between the R knife, the flat knife and the flying knife.
improve:
1. Manual operation should be carefully checked repeatedly, and the knife should be set at the same point as much as possible.
2. When the tool is clamped, blow it with an air gun or wipe it with a rag.
3. When the upper blade of the flying knife needs to measure the blade and the bottom surface of the knife, one blade can be used.
4. A separate tool setting program can avoid the error between R knife, flat knife and flying knife.

WHY CHOOSE US:

1. High-quality, well-trained work team, good management environment;
2. Quick response and support for any query;
3. More than 10 years of professional manufacturing experience to ensure the high quality of your products;
4. Large and strong production capacity to meet your needs; 5. High quality standard and hygienic environment; 6. We have very strict quality control process: Incoming Quality Control (IQC) - all incoming raw materials are inspected before use . b. In-Process Quality Control (IPQC) – Checked during manufacturing. C.
5.Service：welding service, Jigs and Fixture, Heat sinks,Gantry Milling,
Sheet Metal Fabircation, Die casting,Metal stamping, Injenction Molding.Aluminum,Stainless steel,Brass, Copper,Bronze，etc.

Hot Tags: cnc machining custom parts, China cnc machining custom parts manufacturers, suppliers, factory, acrylic chandelier parts, CNC Machining Metal Parts, Aluminum Parts Cnc Machining, Stainless Steel Machined Parts, Black Anodised Aluminium Square Tube, Acrylic Injection Molding