Cnc Parts Machining

 

 

Product name	cnc parts machining
Equipments	3/4/5 Axis Center Machining, CNC lathes, Longitudinal lathes,laser cutting
Material Available	Aluminium,Stainless steel,Carbon Steel,Copper,Brass,Steel Alloys,titanium,Plastic,etc.
Process Type	CNC Milling ,CNC Turning,Drilling, Laser Cutting,Bent,Wire EDM,Rapid Prototyping,etc.
Tolerance	±0.01 mm(Custom available)
Surface treatment	Anodize, Zinc/Nickel/Chrome/Tint/Cooper plating, Black coating, sandblasting，Brushing，polishing，laser engraving
Testing equipment	CMM; manual height gauge; Dial gauge; Marble platform;Roughness measurement
MOQ	1 piece
QC control	100% QC quality inspection before delivery, can provide quality inspection form
Packaging Details	Blister box,EPE Foam,Vaccum packing,Carton box,Wood box(or as your requirement)

Why does the accuracy of cnc parts machining become worse:
One, the factor is that the processing accuracy of the parts themselves is weak. Generally speaking, if the dynamic deviation between the shafts is not adjusted properly during the installation and use process, or changes occur due to damage to the shaft drive chain, it will affect the accuracy of the parts. Usually, the accuracy of the text search caused by this kind of error can adjust the amount of compensation processing. And if the deviation is too large or even an alarm occurs, it is necessary to check the servo motor to see if its speed is too high.

Second, the factor is that too many actual operations will also affect the machining accuracy of the CNC lathe. This may be due to the short acceleration and deceleration time, and the moderate expansion of the transition time. Of course, it is also very likely due to the connection between the screw and the

 

servo motor. cause loosening.

Third, the factor is the concentricity deviation caused by the linkage of the two axes, the radial deformation of the circle caused by the mechanical equipment not being adjusted properly, the compensation of the screw gap of the axis is not correct, or the precise positioning of the axis produces deviation, which may affect the precision. affect the precision of parts.

Ways to improve the efficiency of high-precision cnc parts machining:
During the processing of non-standard equipment parts, there will be associated doubts such as accelerated tool damage, poor surface integrity during production and processing, and difficulties in cutting and removal. It has seriously affected the quality, production cycle time and production cost of

precision parts processing of such raw materials.

 

The processing of non-standard equipment parts must obtain super-lubricated production and processing surfaces and high processing accuracy, which requires the tool to have a high standard service life. Whether the tool is damaged will be based on whether the quality of the machined surface reduces the deviation. The standard service life of diamond tools is very high, and the tool damage is very slow during fast cutting. Therefore, during ultra-precision cutting, the cutting speed will not be restricted by the tool life, which is different from general cutting standards.

The cutting speed selected by non-standard equipment parts processing trainees is often selected according to the dynamic characteristics of the ultra-precision machine tool used and the dynamic characteristics of the cutting system software, that is, the speed ratio with the least vibration is selected, because the surface roughness at this speed ratio The least and the highest quality of production and processing. Obtaining high-quality non-standard automatic production and processing surfaces is the main problem in the processing of non-standard equipment parts. The application is cost-effective, especially for ultra-precision machine tools with good dynamic characteristics and low vibration. High cutting rate can be applied. Improve the output power of production and processing.

 

The selection of the main parameters of non-standard equipment parts processing mainly includes the selection of the focal point of the cutting tool, the selection of the cutting speed, the selection of the cutting depth and the selection of the cutting speed, etc. From the previous experience, we know that if the selection is relatively large when producing and processing plastic materials Angled cutters can effectively suppress work hardening. This is also the basis that when the tool deflection angle is enlarged, the cutting force is reduced, the cutting deformation is small, the contact length between the tool and the cutting is shortened, and the formation of chips is reduced.

 

FAQ:

Q1:What are many common materials that you use in projects?
A: Aluminum, Stainless Steel, Carbon Steel, Copper, Plastics,Titanium and POM

 

Q2:What's your MOQ(minimum order quantity)
A: We don't have MOQ, you are welcome
to send us trial order to test our qualityand service.

 

Q3:What's the payment term do you accept?
A:EXW/FOB Xiamen, paid by T/T, Paypal, Western Union.

 

Q4:What kind of machining we excel in?
A:Included all kind of machining parts.

Hot Tags: cnc parts machining, China cnc parts machining manufacturers, suppliers, factory, acrylic chandelier parts, 5-axis CNC Machining Parts, Aluminum Milling Parts, Aluminum CNC Milling Parts, Custom Stainless Steel Parts, acrylic lamp base parts