Aluminum Stamping Parts

aluminum stamping parts molding:
The aluminum alloy material is soft and expensive, and it is particularly prone to cracking, scratching, and other problems during stamping production. Special attention should be paid to the following points in design and manufacture:
During product design:
1. Sufficient draft angle should be ensured where the product is deeply formed;
2. The aluminum alloy material has a low elongation rate, and the product design should not be too complicated;
3. The R angle of the product surface is greater than 10 to avoid problems such as forming cracks;
4. For U-shaped products, the minimum R angle is greater than 2T

Notes for aluminum stamping parts:
1. Requirements for the sheet metal: the sheet material must reach room temperature, and the life of the sheet metal is generally 6 months;
2. Equipment requirements: Since the AL board is relatively soft, it is recommended to adopt automatic production to reduce defects such as product bumps and scratches caused by human factors and environmental factors.
3. Aluminum parts are easy to heat up, and they are prone to problems such as backlog of waste chips, hardening, and waste materials. Therefore, it is recommended to oil the production, which can dissipate heat and smoothly dredge waste chips and waste materials;
4. Waste chip problem: It is recommended to clean the mold every 300~500 pieces, and the cleaning method can be used to remove chips by blowing or sucking air;
5. Waste transportation: It is recommended to separate from steel plate waste;

Q. How do we guarantee the quality?
A: Always a pre-production sample before mass production;
Always carry out final inspection before shipment;

Q. What services can we provide?
A: Delivery terms accepted: FOB, CFR, CIF, EXW, CIP;
Accepted payment currencies: USD, EUR, CNY;
Accepted payment methods: T/T, L/C, Western Union;

Q: Can you do custom designs and sizes?
A: Yes, ODM and OEM services are available.

Q: How long is your production lead time?
A: Goods will be finished within 15-35 days after sample confirmed.

Hot Tags: aluminum stamping parts, China aluminum stamping parts manufacturers, suppliers, factory, Custom Sheet Metal Enclosures, Custom Made Metal Parts, Custom Sheet Metal Enclosures, Custom Sheet Metal Enclosures, Sheet Metal Welding Parts, Sheet Metal Welding Parts