Precision Sheet Metal Fabrication Parts

 

How to judge the quality of precision sheet metal fabrication parts:
The quality of sheet metal processing, we mainly look at four aspects: painting, steel plate, glass, accessories.
1. Look at the surface of the cabinet, the spray paint of Suzhou sheet metal processing, all the steel of a good cabinet needs to be painted, and it must be sprayed evenly, so as to achieve good rust and dust prevention.

 

2. Look at the thickness of the steel plate. You only need to tap it with your finger to know the thickness of the steel plate. The bracket inside the cabinet should also be thicker, because sometimes the equipment inside is relatively heavy. If it is too thin, it will not be able to bear the equipment. weight up.

 

3. Look at the glass. The glass should be thicker. Pay special attention to see if there are any cracks around the glass.

 

4. The accessories in the cabinet are also very important. If the cabinet has a cable management module so that the cables can be directly fixed in the vertical mounting rail, it would be great. In either case, there should be enough fixing rings on the upper and side walls inside the cabinet (to protect the cables), and the bottom plate of the cabinet can also be lifted to facilitate wiring below. There are also some screws, nuts, etc. used to fix the rack, which should also be sufficient. This can avoid the trouble of insufficient accessories caused by future expansion.

 

Sheet metal processing includes traditional cutting and blanking, blanking, bending and forming methods and process parameters, as well as various cold stamping mold frame layouts and process parameters, various equipment deployment principles and operating methods, and new stamping technologies and new technology.

 

Sheet metal parts are thin-plate hardware parts, that is, parts that can be processed by stamping, bending, stretching, etc. A general definition is-parts with constant thickness during processing. Correspondingly are castings, forgings, machined parts, etc. For example, the iron shell on the surface of a car is a sheet metal part, and some kitchen utensils made of stainless steel are also sheet metal parts.

 

In the process of sheet metal processing, laser cutting skills play an important role in the processing process
First, it will not damage the workpiece: the laser cutting head will not be in contact with the surface of the material to ensure that the workpiece will not be scratched. Secondly, the slit is narrow: the laser beam is focused into a small light spot, so that the center reaches a high power density, and the material is quickly heated to the gasification level, and the evaporation forms holes.

 

 

Q:How can I get a quote, is it free?
A:Send us design drawings or samples. A free quote will be prepared immediately.

 

Q:What is the process of placing an order?
A:1. Send us the drawing to get a free quotation.
     2. We will make samples for you to check the quality.
     3. After the samples are qualified and accept our service, mass production will be carried out.

 

Q:What type of surface treatment can we handle?
A:Powder coating, painting, polishing, brushing, galvanizing, anodizing, sandblasting.

Hot Tags: precision sheet metal fabrication parts, China precision sheet metal fabrication parts manufacturers, suppliers, factory, Custom Sheet Metal Enclosures, Sheet Metal Welding Parts, Custom Made Metal Parts, , Custom Sheet Metal Enclosures